Introduction:
TS-CARBO exploit the high quality carbon fiber, KEVLAR fiber mix with special inorganic minerals packing and other material of NBR which high temperature resistance.
Application
They apply to the environment with high temperature and pressure such as steel making, electrical power, chemical engineering, petroleum industry etc.
| Density | DIN 3754 | | 1.80 | g/cm3 | | Service limits* | | | | | | Max. short term temperature | | | 400 | oC | | Max. continuous operating temperature with non-aggressive media | | | 320 | oC | | Max.continuous operating temperature with steam | | | 280 | oC | | Max.operating pressure | | | 100 | bar | | Compressibility | ASTM F36 | | 9 | % | | Recovery | ASTM F36 | min. | 55 | % | | Stress retention:
- 16 hrs,175 oC,50 N/mm2
- 16 hrs,300 oC,50 N/mm2
| DIN 52913 | min
min. | >25
>30 | N/mm2
N/mm2 | | Tensile Strength(across grain) | DIN 529130 | min. | 8 | N/mm2 | | Gas permeability | DIN 3535 | max. | 0.5 | N/mm2 | | Thickness increase
-ASTM Oil 3,5 hrs150 oC
-ASTM Oil 3,5 hrs20 oC | ASTM F146
ASTM F146
| max.
max.
| 7
10 | %
% | Supply Data
| Color: | Blue |
| | sheet Size -Standard Upon request: | 1500*1500mm | Tolerance :±50mm | | Thickness: | 1500*3000; 1500*4500mm |
| | Available surface finishing: | 0.3~5.0mm | Tolerance : ±10% | According to different requirement of installation and operation condition, the application and processing technical also are different, so this reference only as unfixed guidelines. Therefore, it can’t be deducted any guarantee requirements according to these data. |
